Explore our flagship structural trampolines engineered for maximum load bearing, superior bounce dynamics, and rigorous commercial durability.
Moving beyond standard consumer play equipment to enterprise-grade, structurally sound kinetic bounce platforms engineered for high load thresholds, commercial usage cycles, and extreme fatigue resistance.
Standard retail trampolines often experience structural deformation under dynamic loads exceeding 100 kg due to thin frame walls (1.2mm - 1.4mm). High-capacity platforms utilize 2.0mm to 2.5mm cold-rolled heavy-gauge galvanized steel, providing an Ultimate Tensile Strength (UTS) over 450 MPa to guarantee zero structural fatigue under extreme continuous shock load.
High-capacity load absorption requires precise harmonic balance. By engineering heat-treated, zinc-electroplated high-carbon steel tapered springs (3.2mm wire diameter), our OEM platforms maximize kinetic bounce efficiency while eliminating bottom-out scenarios for users weighing up to 180 kg (400+ lbs).
Using 280 g/m² high-density Permatron® polypropylene UV-stabilized mats reinforced with 8-row UV-resistant bonded polyester thread stitching, our high-capacity mats withstand static stress tests exceeding 600 kg and dynamic impacts up to 1500N without structural tear or V-ring detachment.
A granular look at the engineering matrix that distinguishes Funjump's high-capacity manufacturing processes from traditional consumer factories.
| Engineering Parameter | Standard Retail Trampoline | Funjump High-Capacity OEM Specification | B2B Performance Advantage |
|---|---|---|---|
| Frame Tube Thickness | 1.0 mm – 1.35 mm | 1.8 mm – 2.5 mm Heavy-Duty Gauge | +120% resistance to structural bending under high impact. |
| Anti-Corrosion Treatment | Single-layer light electro-galvanizing | Dual-Sided Hot-Dip Galvanization (>120g/m² Zinc) | Zero rust propagation in high-humidity outdoor/marine climates. |
| Jumping Mat Material | Standard 180 g/m² Polypropylene | 260 - 280 g/m² Permatron® PP + 5000h UV Stabilizer | Prevents micro-tears, color bleaching, and tensile degradation. |
| V-Ring Attachment System | 4 to 6 rows standard cotton thread | 8-Row High-Tenacity UV-Bonded Polyester Stitching | Distributes tension evenly, eliminating seam rupture risks. |
| Spring Metallurgy | Straight wire, non-tapered carbon steel | 3.2mm Wire Dia. Tapered High-Carbon Spring Steel | Smooth strain displacement with extended spring fatigue life (>100k flexes). |
| Safety Enclosure Mesh | 80-90 g/m² Polyester netting | 120-140 g/m² High-Density Anti-UV PE Mesh | Superior tear resistance against continuous lateral body impact. |
Zhejiang Lingsha Technology Co., Ltd. (Funjump) operates a state-of-the-art production complex spanning over 68,000 square meters. With more than 100 highly skilled engineering and operational personnel, our automated production lines consistently deliver a daily output exceeding 1,500 complete trampoline sets.
Our infrastructure encompasses dedicated metal fabrication workshops, automated sewing facilities, precision assembly zones, and a specialized in-house trampoline testing laboratory. This vertical integration allows us to eliminate defects early in the cycle, providing Amazon top sellers, global wholesalers, and commercial buyers with absolute product integrity.
Every custom high-capacity trampoline manufactured at Zhejiang Lingsha Technology undergoes mandatory multi-stage destructive and dynamic load testing.
Weights up to 1.5x maximum rating are loaded onto mats for 72 consecutive hours to verify zero frame collapse or weld cracking.
Automated mechanical arms subject springs to over 100,000 dynamic cycles to measure elastic recovery and tensile degradation.
Galvanized steel components are exposed to high-salinity mist for 500+ hours to ensure rust prevention for coastal deployments.
Accelerated UV weathering chambers verify that PP mats and PE enclosures retain 90%+ structural strength after exposure.
Compliance is non-negotiable for enterprise distributors. Our factory-direct platforms are certified to exceed international safety regulations across major continents.
Full adherence to North American standard consumer safety specifications for trampolines, including impact margin padding, frame structural stability, and warning label placements required for major retail store placement.
Rigorous European safety compliance validated by independent test houses. Covers chemical safety (REACH), sharp edge avoidance, enclosure net entrapment risks, and structural deformation benchmarks.
Certified for extreme outdoor conditions in Australasia. Features high-UV resistance ratings, impact-absorbing foam padding surrounds, and zero-pinch spring geometry for family and commercial safety.
Custom engineering enables Funjump high-capacity trampolines to serve distinct global sectors effortlessly.
Optimized drop-test carton packaging, tool-free assembly designs, and complete branding customization tailored for top-ranking e-commerce sellers.
Heavy-duty rectangular trampoline modules with reinforced inter-locking frames designed for continuous daily commercial foot traffic.
Weather-proof outdoor recreational installations featuring high UV protection and thick marine-grade foam padding for long-term outdoor longevity.
Foldable 40"-51" mini rebounders with silent T-bar adjustable handles engineered for intense aerobic cardio workouts and quick gym storage.
Get instant answers regarding manufacturing capabilities, ordering logistics, trade terms, and OEM customization options.
We are a direct manufacturing factory (Zhejiang Lingsha Technology Co., Ltd.) covering 68,000 square meters, fully equipped with automated metalworking, sewing, and testing facilities.
We flexibly support Ex Works (EXW), FOB Ningbo (our primary port), and CIF terms based on buyer requirements.
Our standard terms are T/T: 30% deposit paid prior to production initiation, with the remaining 70% balance paid against the copy of the Bill of Lading (B/L).
During peak manufacturing season (Nov–Jun), lead time is 35–55 days. During off-peak season (Jul–Oct), lead time is reduced to 10–35 days.
Our standard MOQ is 50 sets per single size. Sample orders and trial batches are accepted for market testing prior to bulk production commitment.
We provide a 1-year standard warranty on main frame components and mats, covering manufacturing defects (excluding improper misuse or accident-related damage).
Yes, sample units are provided upon request. Sample product unit costs can be waived or offset against bulk orders, while the buyer covers freight charges.
Absolutely. We offer complete OEM/ODM customization—including tube diameter, powder-coating colors, spring counts, logo printing on mats, and custom retail box packaging.
Complete product catalog options from Zhejiang Lingsha Technology Co., Ltd. tailored to global trade partners.
Lingsha
